Most RF/MW engineers, who often work in anechoic chambers, have noticed a layer of fine black dust inside their chambers and on their clothes and hands. Some engineers even keep an additional set of work clothes for use within the anechoic chamber due to this issue.
This table can support objects weighing up to 750 kilograms and complies with MIL-Standard for the defence industry. Let us share more details about our production line’s strongest testing table.
COMTESTÂ
Hoge Rijndijk 205 | 2382 AL Zoeterwoude | The Netherlands | +31 71 541 7531 | Send us an email
Privacy Policy © Comtest 2025
COMTEST ENGINEERING BVÂ
Hoge Rijndijk 205 | 2382 AL Zoeterwoude | The Netherlands | +31 71 541 7531 | Send us an email
Privacy Policy © Comtest Engineering 2025
Our services include maintenance and validated testing. We recommend that both are executed by authorized personnel only. Our expert teams can perform preventive maintenance on RF-shielded doors, mode-stirrer systems, and positioning equipment such as turntables. We also offer validation services to see if your EMC test chamber or RF-shielded room still functions within its intended limits and avoiding unexpected down-time or product recalls at the same time.
Our services include maintenance and validated testing. We recommend that both are executed by authorized personnel only. Our expert teams can perform preventive maintenance on RF-shielded doors, mode-stirrer systems, and positioning equipment such as turntables. We also offer validation services to see if your EMC test chamber or RF-shielded room still functions within its intended limits and avoiding unexpected down-time or product recalls at the same time.
A shielded room can perform conducted emission and immunity EMC measurements, eliminating harmful external influences, leading to more accurate and consistent test results. Being a Faraday cage, a shielded room will not only improve test results but will also form an excellent aid in protecting information and essential hardware. Comtest can assist governments, the military, financial institutions, and large corporations in protecting what matters most in critical situations. We offer the highest quality, sensitivity, and security before, during and after working with you.
A shielded room can perform conducted emission and immunity EMC measurements, eliminating harmful external influences, leading to more accurate and consistent test results. Being a Faraday cage, a shielded room will not only improve test results but will also form an excellent aid in protecting information and essential hardware. Comtest can assist governments, the military, financial institutions, and large corporations in protecting what matters most in critical situations. We offer the highest quality, sensitivity, and security before, during and after working with you.
Comtest has been building high-quality antenna test ranges for more than 20 years. We are dedicated to putting our experience to work for you, turning any problem you might have into a customized test solution. As for researching and developing your products, we know speed and return on investment are very important. That’s why we ensure your project is delivered on schedule, on budget and exactly as ordered.
Comtest has been building high-quality antenna test ranges for more than 20 years. We are dedicated to putting our experience to work for you, turning any problem you might have into a customized test solution. As for researching and developing your products, we know speed and return on investment are very important. That’s why we ensure your project is delivered on schedule, on budget and exactly as ordered.
Comtest offers semi and full anechoic chambers that shield almost 100% of ambient emissions and reflect minimal internal radiation. We deliver or build your custom test chamber at your location, depending on what size chamber you need. If you tell us your challenges, we’ll offer a tailored turnkey solution from design to installation, including upgrades and yearly certifications.
We are committed to helping you achieve the best EMC testing possible.Â
Comtest offers semi and full anechoic chambers that shield almost 100% of ambient emissions and reflect minimal internal radiation. We deliver or build your custom test chamber at your location, depending on what size chamber you need. If you tell us your challenges, we’ll offer a tailored turnkey solution from design to installation, including upgrades and yearly certifications.
We are committed to helping you achieve the best EMC testing possible.Â
Last week, our consultants, Hanneke Mertens – van Veen and Dimitrios Barakos, visited seven companies in Japan with our friends from Microwave Factory to help companies implement the closed-loop power control (fast stirring) reverb method as per the ISO11451-5 test standards.
In the first photo at JQA (Japan Quality Assurance Organisation) from left to right: Yuto Nakagawa (Microwave Factory), Riichiro Tetsutani (Microwave Factory), Hanneke van Veen, Hitoshi Tsukahara (JQA), Dimitrios Barakos and Ryosuke Uchiyama (Microwave Factory).
In the second photo, Hanneke and Dimitrios are at JAXA: Japan Aerospace Exploration Agency, with Kassai Toru, their manager of the Mission Assurance Engineering Group.
The third photo was taken at the Microwave Factory office with Keishi Miwa, second from the left, and Akira Nakagawa, second from the right, who work in the Electronic Performance Development Department (R&D) at Toyota Motor Corporation.
Our Special thanks go to our friends from Microwave Factory for initiating the expedition.
In case you would like to know more about the latest updates of the new ISO 11451-5 reverberation chamber method for EMC automotive testing, see the 20-minute presentation from last year where Dimitrios Barakos outlines the basic steps required to enable full vehicle testing in a reverberation chamber. The link is in the comments.