Single-floor absorber
set-ups

A single-floor absorber set-up for radiated emissions AND radiated immunity instead of two different set-ups? Yes, that is exactly what we did for our client, Aesys, in Italy. They raised the need to optimise the space and the test setup time, so we started brainstorming about a solution that could still meet the requirements.

Laboratory Manager Marco Verzeroli from Aesys explains the solution: “Ferrites weigh up to 20 kilos each, are expensive, and take up a lot of space. Together with the team from Comtest Engineering, we set up an innovative and smart solution to use the same pyramidal floor absorbers for both sVSWR and Field Uniformity without using ferrite tiles. The result is a completely renewed and reinforced semi-anechoic chamber for fully compliant EMC and radio testing up to 40 GHz. In fact, this chamber’s NSA and VSWR performances are considerably below the limits set by the CISPR, so we are well-prepared for the future.”

Do you have big plans but limited space? Test our team’s creativity and contact them via our technical consultants, Uliana Trucchi, Hanneke Mertens – van Veen, or Marc Le Roy.

Back to all

Share This Post

More To Explore

Upgrading an EMC chamber with new absorbers on old tiles

Can you upgrade an EMC chamber and keep the old, glued ferrite tiles? “It’s possible”, says Uliana Trucchi, one of our technical consultants. “Say you want to replace your old absorbers because you need to meet performances over 1GHz, and you wish to keep the ferrite tiles because they are glued to the chamber’s walls and ceiling. That is exactly what the people from Nemko in Germany asked us for the chamber upgrade in the photo.”

21/11/2024

The number of stirrer positions vs power

Testing time is valuable, so this post provides tips on optimising the number of stirrer positions in your reverberation chamber to fit your budget and test requirements. “There is a delicate balance between the number of stirrer positions and the amplifier power for a given reverberation chamber,” explains our R&D Consultant, Dimitrios Barakos. By collaborating with EMC test solution provider Rohde & Schwarz, we aim to find the most efficient solution for our clients. “

13/11/2024
Test Solutions
Service & Upgrades
About
News & Events

COMTEST 

Hoge Rijndijk 205 | 2382 AL Zoeterwoude | The Netherlands | +31 71 541 7531 | Send us an email

Privacy Policy © Comtest 2024

COMTEST ENGINEERING BV 

Hoge Rijndijk 205 | 2382 AL Zoeterwoude | The Netherlands | +31 71 541 7531 | Send us an email

Privacy Policy © Comtest Engineering 2024

Our services include maintenance and validated testing. We recommend that both are executed by authorized personnel only. Our expert teams can perform preventive maintenance on RF-shielded doors, mode-stirrer systems, and positioning equipment such as turntables. We also offer validation services to see if your EMC test chamber or RF-shielded room still functions within its intended limits and avoiding unexpected down-time or product recalls at the same time.

Our services include maintenance and validated testing. We recommend that both are executed by authorized personnel only. Our expert teams can perform preventive maintenance on RF-shielded doors, mode-stirrer systems, and positioning equipment such as turntables. We also offer validation services to see if your EMC test chamber or RF-shielded room still functions within its intended limits and avoiding unexpected down-time or product recalls at the same time.

A shielded room can perform conducted emission and immunity EMC measurements, eliminating harmful external influences, leading to more accurate and consistent test results. Being a Faraday cage, a shielded room will not only improve test results but will also form an excellent aid in protecting information and essential hardware. Comtest can assist governments, the military, financial institutions, and large corporations in protecting what matters most in critical situations. We offer the highest quality, sensitivity, and security before, during and after working with you.

A shielded room can perform conducted emission and immunity EMC measurements, eliminating harmful external influences, leading to more accurate and consistent test results. Being a Faraday cage, a shielded room will not only improve test results but will also form an excellent aid in protecting information and essential hardware. Comtest can assist governments, the military, financial institutions, and large corporations in protecting what matters most in critical situations. We offer the highest quality, sensitivity, and security before, during and after working with you.

Comtest has been building high-quality antenna test ranges for more than 20 years. We are dedicated to putting our experience to work for you, turning any problem you might have into a customized test solution. As for researching and developing your products, we know speed and return on investment are very important. That’s why we ensure your project is delivered on schedule, on budget and exactly as ordered.

Comtest has been building high-quality antenna test ranges for more than 20 years. We are dedicated to putting our experience to work for you, turning any problem you might have into a customized test solution. As for researching and developing your products, we know speed and return on investment are very important. That’s why we ensure your project is delivered on schedule, on budget and exactly as ordered.

Comtest offers semi and full anechoic chambers that shield almost 100% of ambient emissions and reflect minimal internal radiation. We deliver or build your custom test chamber at your location, depending on what size chamber you need. If you tell us your challenges, we’ll offer a tailored turnkey solution from design to installation, including upgrades and yearly certifications.

We are committed to helping you achieve the best EMC testing possible. 

Comtest offers semi and full anechoic chambers that shield almost 100% of ambient emissions and reflect minimal internal radiation. We deliver or build your custom test chamber at your location, depending on what size chamber you need. If you tell us your challenges, we’ll offer a tailored turnkey solution from design to installation, including upgrades and yearly certifications.

We are committed to helping you achieve the best EMC testing possible.